OEM Carrier 2-Pole Contactor 30 Amp 24V Coil for Model PY2PEB060115AB

This OEM 2-pole contactor is the factory-specified replacement for the Carrier PY2PEB060115AB packaged gas/electric unit, carrying OEM part number HN52KC025 (current shipping replacement: HN52KC024). The contactor acts as the high-voltage relay that switches compressor and condenser fan power on and off in response to a 24V signal from the thermostat. When the contactor fails — due to burned or pitted contacts, a welded-shut plunger, or a failed coil — your system will either refuse to turn on entirely, run continuously without shutting off, or produce a loud buzzing hum from the electrical panel area with no cooling output.

• Specs: 2-Pole (Double Pole) | 30 Amp RES / 20 Amp FLA | 24V AC Coil | 50/60 Hz | Tyco Electronics 3100A20Q328 form factor | Factory OEM tolerance
• OEM vs Generic: OEM contactors use factory-rated silver-alloy contacts that resist pitting and arcing over thousands of cycles. Generic contactors often use lower-grade contact materials, leading to premature welding or failure — especially on high-demand 5-ton units like the PY2PEB060115AB.
• Install difficulty: 2/5 — Always shut off power at the disconnect and breaker before beginning. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, insulated wire labels or tape. Photograph all wiring connections before removing the old contactor to ensure correct re-termination.
• Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse.

Compatibility: Designed for the Carrier PY2PEB060115AB packaged unit. Also cross-compatible with many Carrier, Bryant, and Payne split-system condensers using a 2-pole, 30 Amp, 24V coil contactor. Verify amperage and pole count on your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy — just reach out before placing your order.