OEM Carrier Hot Surface Igniter for Gas Furnace PY2PEB060090NB

The hot surface igniter is the component that glows red-hot to light the gas at the burners on each call for heat. When the thermostat calls, the board energizes the igniter; once it reaches ignition temperature the gas valve opens and the burners light. A cracked, chipped, or aged igniter is the single most common no-heat failure: it either fails to glow at all or glows weakly and never reaches light-off temperature. Homeowners notice the inducer and blower cycling but no flame, repeated ignition attempts ending in lockout, or cold air from the registers despite the system 'trying' to start. This is a genuine Carrier igniter. The element material is silicon carbide (the classic fragile gray element) or silicon nitride depending on the production revision — silicon nitride is more impact- and oxidation-resistant. A serviceable igniter reads roughly 40-90 ohms cold; an open circuit (infinite resistance) confirms a burned-out element. OEM mounting bracket, ceramic block, and lead length are matched to the PY2PEB burner box so the tip seats at the correct gap and angle to the gas stream. OEM matters because generic igniters frequently use out-of-spec resistance elements that draw the wrong current — too high and it won't glow hot enough to ignite, too low and it overheats and cracks prematurely, shortening service life dramatically. Install difficulty: 2/5. Tools needed: 1/4" nut driver, multimeter (ohms), and gloves. #1 safety warning: turn off the gas supply and disconnect power at the furnace switch before servicing — and never touch the ceramic element with bare fingers, as skin oil creates hot spots that crack it. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PEB060090NB. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.