OEM Carrier Silicon Nitride Hot Surface Igniter for PY2PEB060090AA

The hot surface igniter is where every heating cycle begins on your Carrier PY2PEB060090AA. On a call for heat, the control board sends 120 volts to this ceramic element so it glows white-hot and lights the gas burners. When it fails, the furnace simply will not light: you will hear the draft inducer spin up and the gas valve click, but no flame follows and no warm air reaches the registers. A worn igniter may glow dim, glow intermittently, or not glow at all, and most boards lock the unit out after three failed attempts, leaving you with cold air on the coldest mornings. This is a silicon nitride hot surface igniter, the durable upgrade over brittle silicon carbide elements. Silicon nitride resists thermal shock and cracking, so it survives thousands more on/off cycles. Cold resistance typically measures 40 to 75 ohms on a multimeter; an open (infinite) reading confirms a burned-out element. It runs on 120VAC line voltage and reaches roughly 2,500°F ignition temperature in 17 to 45 seconds. OEM matters here because ignition timing is matched to your board. Generic igniters often use cheaper ceramic with wider tolerances that will not reach proper glow temperature or that fracture after a single season of thermal cycling. An element with the wrong resistance will not glow hot enough to light the burners reliably, causing repeated lockouts; an out-of-spec element burns out early. This OEM part matches the exact bracket, plug, and temperature curve Carrier engineered for the unit. Install difficulty: 2 of 5. Tools: 1/4-inch nut driver, sometimes a T20 Torx bit, and clean gloves. Number one safety rule: shut off both the gas supply and the electrical breaker before servicing, and never touch the ceramic with bare fingers, since skin oils create hot spots that crack it. Handle only by the base. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PEB060090AA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.