OEM Carrier Condenser Fan Motor 1/4 HP 460V for Model PY2PEB060090AA — HC39GE468
This OEM condenser fan motor is the factory-specified replacement for the Carrier PY2PEB060090AA packaged unit. The condenser fan motor drives the outdoor fan blade to pull ambient air across the condenser coil, rejecting heat from the refrigerant circuit. When this motor fails, the system will overheat, trigger a high-pressure lockout, or simply shut down — leaving you with a no-cool call that escalates fast in peak season. Common failure signs include a humming motor that won't spin, visible burn marks on the windings, or a condenser fan that runs intermittently before tripping the unit offline.
-
Specs: 1/4 HP | 460/400V | 60/50 Hz | 0.70A | 1100/900 RPM | Single Phase | Closed Enclosure | CW Rotation (shaft down) | 1.5" Shaft Diameter | 5-5/8" Frame (48Y) | Replaces GE/Genteq 5KCP39KFV110AS
-
OEM vs Generic: This is a genuine Carrier Factory Authorized Part (FAP), engineered to exact factory tolerances for the PY2PEB060090AA. OEM motors are validated for correct RPM-to-airflow output, natural frequency separation to minimize vibration, and a design life of up to 100,000 on/off cycles. Generic aftermarket motors often run off-spec RPM, increasing condenser head pressure and shortening compressor life.
-
Install Difficulty: 3/5 — Motor swap on a packaged unit requires removing the condenser fan guard and disconnecting three motor leads. Always verify rotation direction before reinstalling the fan blade. Tools needed: 5/16" and 3/8" nut drivers, wire stripper, multimeter, and a capacitor discharge tool. Torque the fan blade set screw to spec and confirm free rotation before powering up.
-
Warranty: 1-year OEM factory warranty on parts. Ships same business day from our warehouse on all in-stock orders.
Compatibility: Engineered as a direct OEM replacement for Carrier PY2PEB060090AA packaged units. Also cross-references to Bryant and Payne units sharing the HC39GE468 specification. Always verify voltage (460V), horsepower (1/4 HP), and rotation against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — reach out before you order if you have any questions. In stock and ships today.