OEM Carrier 2-Pole Contactor 30 Amp 24V Coil for Model PY2PEB048130AB

This OEM 2-pole contactor is the factory-specified high-voltage switching relay for the Carrier PY2PEB048130AB packaged unit. The contactor acts as the primary power switch for the compressor and condenser fan — when the thermostat calls for cooling, a 24V signal from the control board energizes the contactor coil, closing the high-voltage contacts that power the system. When this part fails, the most common symptoms are the AC not turning on at all, the unit humming without starting, or visible pitting and burning on the contact points.

• Specs: 2-Pole (double pole) | 30 Amp FLA | 24V AC coil | 600V rated contacts | Definite Purpose contactor | Replaces OEM part # HN52KC025 (superseded by HN52KC024)
• OEM vs Generic: This OEM-spec contactor meets Carrier's exact coil pull-in voltage and contact gap tolerances. Generic contactors often use lower-grade silver alloy contacts that arc and pit faster, leading to repeat failures within a single cooling season.
• Install Difficulty: 3/5 — High-voltage work requires full system lockout/tagout. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter, and insulated gloves. Always photograph all wire positions before disconnecting the old contactor.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Directly fits Carrier model PY2PEB048130AB packaged unit. Note that OEM part HN52KC025 has been superseded — this listing ships the current authorized replacement (HN52KC024) which is the factory-approved direct swap. Verify pole count, amperage, and coil voltage on your unit's data plate before ordering. Our team is available to confirm fitment prior to purchase.