OEM Carrier Condenser Fan Motor for PY2PEB036060AA Package Unit

The condenser fan motor pulls outdoor air across the condenser coil of your Carrier PY2PEB036060AA so the refrigerant can reject the heat it absorbed indoors. When the motor weakens, overheats, or seizes, head pressure climbs fast: the compressor runs hot, the system short-cycles on its high-pressure or thermal overload, and cooling capacity collapses on the hottest days. Homeowners notice warm air from the registers, a loud hum at the outdoor unit with a fan blade that won't spin (or only spins after a push), and the system tripping off a few minutes into every cycle. This is a totally enclosed, weather-rated condenser fan motor matched to the PY2PEB package unit — sized to the OEM horsepower (typically the 1/4–1/3 HP class), RPM, rotation direction, and shaft diameter, with the correct run-capacitor MFD requirement. It uses sealed, permanently lubricated bearings for outdoor duty, and its mounting bolt pattern and shaft length match the original bracket and fan blade. A condenser motor must match HP, RPM, rotation, and capacitor microfarads exactly. A generic motor with slightly different specs moves the wrong volume of air, runs hotter, and drives head pressure out of range — which shortens compressor life, the most expensive component in the entire system. OEM motors also carry the correct internal thermal overload, so they shut down safely instead of cooking their windings. Install difficulty: 4/5. Tools: 1/4" and 5/16" nut drivers, a socket set for the fan blade and bracket, a multimeter, and a capacitor tester. SAFETY: shut off the breaker AND the outdoor disconnect, then discharge the run capacitor before touching any wiring — capacitors hold a lethal charge even with power off. Ships same business day from our stocked warehouse on orders placed before 3 PM CST, backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY2PEB036060AA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.