OEM Carrier Hot Surface Igniter for Furnace PY1RPA120224ABWA

The hot surface igniter is the component that lights the gas at the burners each time your furnace calls for heat. On an ignition cycle the control board sends voltage to the igniter, which glows red-hot (around 2,000°F) so that when the gas valve opens the burners light immediately. When the igniter cracks or its element ages, you'll notice the furnace trying to start — the inducer runs and you hear the gas valve click — but you get no flame and the blower never delivers warm air, often followed by a lockout after several failed attempts. A weak igniter that glows but no longer reaches full temperature causes intermittent no-heat calls, usually worse on the coldest mornings. Specs: This is a 120V hot surface igniter. Carrier furnaces of this generation use either a fragile light-gray silicon carbide element or a more durable silicon nitride element; cold resistance typically reads roughly 40–90 ohms depending on element type — an open (infinite) reading means a cracked element. The mounting bracket and terminal plug must match the OEM part for correct burner alignment. OEM vs Generic: Igniters live or die on element quality. Generic igniters often use thinner silicon carbide that runs at the wrong resistance, so they either fail to glow hot enough for reliable light-off or burn out within a season or two. The genuine Carrier igniter is matched to the board's voltage and timing, giving consistent ignition and a longer service life. Install: Difficulty 2 of 5. Tools: 1/4" nut driver and a multimeter to read element resistance. #1 safety warning: turn off the gas supply and kill electrical power at the breaker first, and never touch the igniter element with bare fingers — skin oils create hot spots and cause premature failure. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1RPA120224ABWA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.