OEM Carrier Flame Sensor for PY1RPA072115ACWA Gas Furnace

The flame sensor is the small metal rod that tells your furnace's control board the burners are genuinely lit. It works by flame rectification: seated in the live flame, the rod conducts a minute DC current back to the board to confirm combustion. Over time the rod picks up carbon, oxidation, and scale that insulate it, so the signal weakens or disappears. The board then reads 'no flame' and closes the gas valve within a few seconds — a safety response, not a failure of the gas valve itself. You'll see the furnace ignite, burn for a moment, then cut out and retry. After several attempts it locks out, and you're left with no heat and a flashing diagnostic code. A properly functioning sensor delivers a steady flame current in the 1 to 6 microamp DC range, with most boards happiest above 2 µA. This OEM rod matches Carrier's exact rod length, bend geometry, and heat-resistant alloy so it stays positioned in the hottest zone of the flame for a strong, repeatable reading. Why OEM matters here: many aftermarket rods are cut to a generic length or use cheaper alloys that oxidize quickly. A rod that sits even slightly out of the flame produces a marginal microamp signal — and you'll be chasing the same intermittent shutdowns all over again. Install difficulty: 1 of 5. Tools: 1/4" nut driver (often 5/16") and a multimeter capable of reading DC microamps to verify flame current. Safety first: turn the furnace off at the breaker AND close the gas shutoff valve before removing the sensor. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1RPA072115ACWA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.