OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PY1RJA060115AAWA

This OEM condenser fan motor (part #HC39GR234) is the factory-specified replacement for the Carrier PY1RJA060115AAWA split-system air conditioner. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat from the refrigerant. When this motor fails, the outdoor unit will run briefly then shut down on high-pressure lockout, or the condenser fan will simply not spin — leaving your system unable to cool. Common symptoms include the outdoor fan humming without turning, the system tripping on high-head pressure, or the unit overheating and short-cycling.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | 1/2" shaft diameter | 1.5" shaft length | Frame 48Y | Rotation: CWLE (Counter-Clockwise, shaft end)
• OEM vs Generic: This is an OEM factory-matched motor engineered to exact Carrier tolerances. Generic motors often use lower-grade bearings and wider electrical tolerances, leading to premature failure — especially in high-ambient summer conditions. OEM ensures factory efficiency, noise levels, and service life.
• Install difficulty: 3/5 — Disconnect power at the breaker and capacitor before handling. Tools needed: nut driver set, needle-nose pliers, multimeter, wire nuts or butt connectors. Always photograph existing wiring before disconnecting. Strongly recommended: replace the run capacitor at the same time, as a failing capacitor is frequently the root cause of motor failure.
• Warranty: 1-year OEM factory warranty. In stock — ships same business day from our warehouse.

Compatibility: Designed for Carrier model PY1RJA060115AAWA. Also cross-references Carrier/Bryant/Payne part HC39GR234A. Verify voltage, HP, RPM, and rotation direction on your unit's data plate before ordering. Not sure it fits? Our HVAC parts specialists verify fitment before you buy — contact us today.