OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PY1RJA060074AAWB

This is the genuine OEM factory-specified condenser fan motor for the Carrier PY1RJA060074AAWB packaged unit. The condenser fan motor drives the outdoor fan blade to pull ambient air across the condenser coil, rejecting heat from the refrigerant and keeping the compressor operating within safe temperature limits. When this motor fails, symptoms include the outdoor fan not spinning, the compressor overheating and tripping on high-pressure lockout, or the unit shutting down entirely within minutes of startup. Do not delay replacement — a failed condenser fan motor can cause compressor damage if the system continues to run without adequate airflow.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | 1/2" Shaft Diameter | 1.5" Shaft Length | Clockwise Leading Edge (CWLE) rotation | Vertical mount only
• OEM vs Generic: This is a genuine Carrier/GE Genteq factory-authorized motor (Part # HC39GR234, GE model 5KCP39GGY910S), built to exact factory tolerances. Generic motors may differ in shaft dimensions, rotation direction, or thermal protection ratings — mismatches that can lead to early failure or voided equipment warranties.
• Install Difficulty: 3/5 — Disconnect and lock out power before beginning. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and a helper to support the fan blade assembly. Always inspect and replace the run capacitor at the same time — a capacitor out of tolerance is a leading cause of premature motor failure. Verify rotation direction before securing wiring.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Engineered as the direct OEM replacement for Carrier model PY1RJA060074AAWB. Always cross-reference the motor's HP, voltage, RPM, rotation, and shaft specifications against your unit's data plate before ordering. Not sure it fits? Contact our parts specialists — we verify fitment before you order.