OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PY1RJA036074ABWB

This OEM condenser fan motor (part #HC39GR234) is the factory-specified replacement for the Carrier PY1RJA036074ABWB split-system air conditioner. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat and keeping the refrigerant cycle operating efficiently. When this motor fails, the compressor overheats and the system either shuts down on high-pressure lockout or runs continuously without cooling — leaving you with a warm house on the hottest day of the year.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | CWLE rotation | Frame 48 | 0.5" shaft diameter | 1.5" shaft length | 3-wire
• OEM vs Generic: This is a factory-authorized OEM part built to exact Carrier tolerances. Generic motors often deviate in RPM and amperage draw, stressing the compressor and voiding equipment warranties. Always replace with OEM to protect your system investment.
• Install difficulty: 3/5 — Disconnect power at the breaker and capacitor terminals before touching any wiring. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers, multimeter. Photograph all wiring connections before disconnecting. Note: strongly recommended to replace the run capacitor at the same time — a failed or out-of-tolerance capacitor is a leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Factory-matched for Carrier model PY1RJA036074ABWB. Cross-references: HC39GR234A. Also fits select Bryant and Payne units sharing this motor specification — verify HP, voltage, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment before you buy.