OEM Carrier Hot Surface Igniter for PY1REA120180ABWA Furnace

The hot surface igniter is what lights the burners on every heating cycle. When the control board calls for heat, the igniter glows orange-hot and ignites the gas as the valve opens. On the PY1REA120180ABWA, a cracked or worn igniter is the single most common no-heat failure. Tell-tale symptoms are a unit that clicks, runs the inducer, but never produces flame; cold air from the registers; or a system that locks out after several failed ignition attempts. Because igniters are brittle, they often fail from age, vibration, or simply being touched — the element develops a hairline crack and stops glowing hot enough to light gas. This is a genuine OEM igniter built to the correct element material and resistance for this model. Carrier units in this family typically use a robust silicon nitride element, which is far more durable and shock-resistant than older silicon carbide "M-series" igniters. A healthy igniter reads roughly 40–75 ohms cold; an open or out-of-range reading on your multimeter confirms a bad part. Match the mounting bracket and plug before installing. OEM matters here: a generic igniter with the wrong resistance won't reach proper ignition temperature, causing intermittent no-heat calls, and cheaper silicon carbide elements crack far sooner, leaving you replacing the part every season. Install difficulty: 2 of 5. Tools: 1/4" nut driver and a multimeter. #1 safety warning: turn off the gas supply and kill the breaker before servicing, and never touch the igniter element with bare fingers — skin oils create hot spots that crack the new part. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1REA120180ABWA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.