OEM Carrier Condenser Fan Motor 1/4 HP 460V — HC39GE468 for Model PY1REA090125ACWB

This OEM Carrier condenser fan motor (part number HC39GE468, superseded by HC39GE468A) is the factory-specified replacement for the Carrier PY1REA090125ACWB commercial packaged unit. The condenser fan motor drives the outdoor fan blade to pull ambient air across the condenser coil, rejecting heat from the refrigerant circuit. When this motor fails, the condenser can no longer dissipate heat — leading to high-pressure lockouts, compressor overheating, and complete system shutdown. Common failure symptoms include the outdoor fan not spinning, the unit tripping on high-pressure fault, or a loud humming with no fan rotation.

• Specs: 1/4 HP | 460/400V | 60/50 Hz | 1100/900 RPM | 0.70A | Single Phase | Frame 48Y (5-5/8" diameter) | 1.5" shaft | Clockwise rotation (CW) viewed from shaft end | Closed enclosure
• OEM vs Generic: This is a genuine Carrier OEM motor wound to exact factory torque and thermal protection specs. Aftermarket motors commonly deviate in amperage draw and bearing grade, risking premature failure — especially critical on 460V commercial equipment where motor stress is elevated.
• Install difficulty: 3/5 — Requires shutting off 460V 3-phase power at the disconnect and verifying lockout/tagout before opening the unit cabinet. Tools needed: 5/16" and 3/8" nut drivers, wire nuts or spade connectors, multimeter, and a blade balancer. Always photograph the wiring harness and fan blade pitch orientation before disassembly. It is strongly recommended to replace the dual-run capacitor simultaneously, as a capacitor out of tolerance is a leading cause of motor burnout.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse when ordered by 3:00 PM local time.

Compatibility: Direct OEM replacement for Carrier PY1REA090125ACWB commercial packaged units. Supersedes original part number HC39GE468; current OEM ship part is HC39GE468A — identical specifications. Verify voltage (460V), HP (1/4), and RPM (1100/900) on your unit's data plate before ordering. Our parts specialists are available to confirm fitment — contact us before you buy for peace of mind.