OEM Carrier 2-Pole Contactor 30 Amp 24V Coil — Model PY1PPB060115AAAA (HN52KC025)

This OEM contactor is the factory-specified replacement for the Carrier PY1PPB060115AAAA packaged unit. The contactor acts as a high-voltage relay, using a low-voltage 24V control signal from the thermostat to close a circuit that powers the compressor and condenser fan motor. When the contactor fails — due to pitted or welded contacts, a burnt coil, or worn contact tips — the most common symptom is an air conditioner that won't turn on at all, or one that runs continuously even when cooling is not called for.

• Specs: 2-Pole (Double Pole) | 30 Amp RES rating | 24V AC coil | Definite Purpose contactor | Factory-matched Tyco Electronics design
• OEM vs Generic: OEM contactors are built to exact factory contact gap and coil pull-in specifications. Generic units frequently use lower-grade silver alloy contacts that pit faster under repeated cycling, shortening service life significantly in high-demand climates.
• Install difficulty: 3/5 — Always disconnect power at the disconnect box and verify zero voltage before touching any wiring. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Photograph all wire connections before removal. Note: discharge any capacitors in the unit before working in the control panel.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Ships same business day from our warehouse.

Compatibility: Engineered for the Carrier PY1PPB060115AAAA packaged unit. OEM part number HN52KC025 (superseded by HN52KC024 — fully interchangeable). Also cross-references to Carrier, Bryant, and Payne systems using a 2-pole, 30-amp, 24V coil contactor. Confirm your unit's data plate voltage and amperage before ordering — our team is happy to verify fitment. Order now and your part ships today.