OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PY1PPB048115NBAA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PY1PPB048115NBAA packaged unit. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat from the refrigerant. When this motor fails, the condenser coil overheats, triggering high-pressure lockout — your system may run briefly then shut down, or the outdoor fan may simply stop spinning entirely while the compressor continues to run, risking compressor damage.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60Hz | Frame 48 | 0.5" Shaft Diameter | 1.5" Shaft Length | CWLE Rotation | Vertical Mount Only
• OEM vs Generic: This OEM motor is wound and balanced to Carrier factory tolerances. Generic motors often carry wider RPM and amp tolerances that can shorten bearing life, increase vibration, and void equipment warranties. OEM is always the recommended choice for compressor protection.
• Install difficulty: 3/5 — Disconnect power at the disconnect box before opening the unit. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers, multimeter. Always photograph wiring before disconnecting leads. Always replace the run capacitor at the same time — a failing capacitor is the #1 cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In-stock — ships same business day from our warehouse.

Compatibility: Designed for Carrier model PY1PPB048115NBAA packaged units. OEM part number HC39GR234 (current supersede: HC39GE238). Verify horsepower, voltage, RPM, and rotation on your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.