OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PY1PPB042060AAAA

This OEM condenser fan motor (part #HC39GR234) is the factory-specified replacement for the Carrier PY1PPB042060AAAA split-system heat pump. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat and maintaining proper refrigerant pressure. When this motor fails, the outdoor unit will run briefly before tripping on high-pressure lockout, or the fan blade will not spin at all — causing the system to overheat and shut down within minutes on a hot day.

• Specs: 1/4 HP | 208-230V | 1 Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | CWLE rotation | 1/2" shaft diameter | 1.5" shaft length | GE Genteq 5KCP39GGY910S cross-reference
• OEM vs Generic: This OEM part is wound and balanced to Carrier's exact factory tolerance, ensuring correct airflow, proper motor temperature, and full system efficiency. Generic motors frequently deviate in RPM and rotation direction, risking premature compressor failure or reversed airflow.
• Install difficulty: 3/5 — Requires disconnecting power at the disconnect box and capacitor discharge before removal. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, multimeter, and wire nuts. Always photograph the existing wiring and fan blade pitch angle before disassembly. Pro tip: replace the run capacitor at the same time — an out-of-tolerance capacitor is the leading cause of premature motor burnout.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Factory-matched for Carrier model PY1PPB042060AAAA. Also cross-references Carrier/Bryant/Payne part #HC39GR234A. Verify HP, voltage, RPM, and rotation direction on your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you purchase — just reach out before checkout.