OEM Carrier Draft Inducer Motor with Capacitor (HC30GB230 / HC30GR231) for Model PY1PPA036100ADBA

This OEM draft inducer motor with capacitor is the factory-specified replacement for the Carrier PY1PPA036100ADBA packaged unit. The draft inducer motor performs a critical safety function: it draws combustion air into the heat exchanger and expels exhaust gases safely out of the flue before the burners are allowed to fire. When this motor fails or its run capacitor degrades, the furnace control board will detect a missing inducer-proved signal, resulting in a hard lockout, no-heat condition, or repeated pressure switch fault codes.

• Specs: 1/16 HP | 208/230V, 1-Phase | 3450 RPM | CCWLE rotation | 5/16" × 3.3" shaft | Ball bearing | Thru-bolt mounting | Includes 4 MFD 370 VAC run capacitor and hall-effect sensor
• OEM vs Generic: This is a genuine Carrier Factory Authorized Part, manufactured to exact OEM tolerances. Generic inducer motors frequently ship with mismatched capacitor ratings and incorrect shaft dimensions, risking premature bearing failure and combustion safety issues — always specify OEM on draft inducers.
• Install Difficulty: 3/5 — Shut off gas and 24V control power before beginning. Tools required: 1/4" and 5/16" nut drivers, slip-joint pliers, multimeter, and high-temp gasket sealant. Photograph all wiring and flue connections before disassembly. Replace the inducer gasket at the same time to prevent exhaust leaks.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Engineered as a direct OEM replacement for Carrier model PY1PPA036100ADBA packaged units. Note: HC30GB230 has been superseded by HC30GR231 — both part numbers are fulfilled by the current production unit shipped here. Verify motor HP, voltage, RPM, and rotation direction against your unit's data plate prior to ordering. Our HVAC parts specialists are available to confirm fitment before you purchase.