OEM Carrier Draft Inducer Motor with Capacitor (HC30GB230) for Model PY1PPA036080ACBA

The Carrier HC30GB230 is the factory OEM draft inducer motor with integrated run capacitor, engineered as a direct replacement for the Carrier PY1PPA036080ACBA packaged unit. The draft inducer motor creates the negative pressure required to pull combustion gases through the heat exchanger and exhaust them safely out the flue. Without a functioning inducer motor, the pressure switch will not close, and the unit will lock out on a no-heat fault — leaving your system dead before ignition ever occurs.

Common failure symptoms that indicate a faulty draft inducer motor include: the unit attempting to start but locking out before ignition, a grinding or rattling noise from the inducer housing, a pressure switch fault code displayed on the control board, or a motor that hums but fails to spin. Replacing the entire motor-and-capacitor assembly with the OEM unit ensures exact airflow performance and pressure switch compatibility.

• Specs: OEM Carrier Part # HC30GB230 | Draft inducer motor with run capacitor | Factory-matched RPM, voltage, and CFM for PY1PPA036080ACBA | Includes integrated capacitor for reliable single-wire hookup
• OEM vs Generic: This is a genuine Carrier OEM assembly. OEM motors are wound and balanced to exact factory tolerances, ensuring correct draft pressure for pressure switch closure. Aftermarket alternatives may vary in RPM and shaft diameter, risking recurring faults or pressure switch mis-trips.
• Install Difficulty: 3/5 — Disconnect power and gas before beginning. Tools needed: nut driver set, Phillips screwdriver, needle-nose pliers, multimeter. Photograph all wiring and flue connections before removal. Note inducer housing gasket condition and replace if damaged. Always verify pressure switch hose connections after installation.
• Warranty: 1-year OEM factory warranty against defects in materials and workmanship. Ships same business day from our warehouse when ordered before 3 PM local time.

Compatibility: Designed for the Carrier PY1PPA036080ACBA packaged gas/electric unit. Always verify the part number on your existing motor's label and cross-reference with your unit's data plate before ordering. Our fitment team is available to confirm compatibility — contact us before you order if you have any questions. In stock and ready to ship today.