OEM Carrier Draft Inducer Motor with Capacitor (HC30GB230) for Model PY1PPA030080ACBA

This is the OEM factory-specified draft inducer motor assembly for the Carrier PY1PPA030080ACBA gas furnace. The draft inducer motor is the first component to energize on every heat call — it purges residual combustion gases from the heat exchanger, builds negative pressure to close the pressure switch, and proves safe venting before the ignition sequence begins. When this motor fails, you'll typically see one or more of the following: the furnace locks out before ignition, a pressure switch fault code is triggered, the inducer runs loudly with bearing noise, or the unit short-cycles with no heat output.

• Specs: 1/16 HP | 208/230V | 60 Hz | 1-Phase | 3,450 RPM | CCWLE rotation | 5/16" × 3.3" shaft | Ball bearing | Thru-bolt mounting | Includes factory-matched 4 MFD @ 370 VAC run capacitor and hall effect sensor
• OEM vs Generic: This is a genuine Carrier Factory Authorized Parts assembly manufactured to exact OEM tolerances. Generic inducers frequently deviate in rotation, shaft dimensions, or capacitor rating — any mismatch risks pressure switch failure, venting issues, or carbon monoxide hazards. OEM is the only safe choice here.
• Install difficulty: 3/5 — Shut off gas and power before beginning. Tools needed: 1/4" and 5/16" nut drivers, flat-head screwdriver, multimeter, and high-temp RTV silicone for the inducer gasket. Photograph all wiring and pressure switch tubing connections before removal. Verify rotation direction and confirm pressure switch operation after installation.
• Warranty: 1-year OEM factory warranty against manufacturing defects. Replacement recommended whenever hall effect sensor signals are erratic or bearing noise is present. Ships same business day from our warehouse.

Compatibility: Designed as the direct OEM replacement for Carrier model PY1PPA030080ACBA gas furnaces. Also cross-references Carrier HC30GR231 (current superseding part number), AO Smith JF1H102N, and Fasco 71626713. Always verify your unit's data plate voltage and motor specifications before ordering. Our parts specialists are available to confirm fitment — contact us before you order if you have any questions.