OEM Carrier Silicon Carbide Hot Surface Igniter for PY1PPA030040ACBA

The hot surface igniter is the ignition source for your Carrier PY1PPA030040ACBA gas furnace. On every heat call it heats past 2,000°F to light the burner gas. When the element weakens, cracks, or burns through, the classic symptom is no heat: the inducer motor spins up, the gas valve clicks, but the burners never light and the furnace locks out after three failed trials. Homeowners often report short-cycling, cold air from the registers, a clicking sound with no "whoosh," or a furnace that runs the blower but never warms the house. This is a 120V silicon carbide hot surface igniter. A healthy element reads roughly 40–75 ohms cold on a multimeter; an open-loop (OL) reading confirms a failed igniter. Silicon carbide is the OEM material for this Carrier platform — it reaches ignition temperature quickly and seats to the burner with factory geometry. OEM matters here because ignition timing is unforgiving. Generic igniters with the wrong resistance won't glow hot enough within the board's trial window, causing repeated lockouts, or they run too hot and fail within a season. Cheaper silicon nitride or off-spec elements may not match the mounting bracket, leaving the tip mispositioned over the burner port. This OEM part restores exact resistance, temperature, and fit. Install difficulty: 2/5. Tools needed: 1/4" nut driver and a multimeter for verification. #1 safety warning: shut off the gas supply and kill power at the breaker before servicing — the igniter ceramic is also brittle, so never touch the element with bare fingers. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1PPA030040ACBA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.