OEM Carrier Gas Furnace Flame Sensor Rod for PY1PNB060115AAAA

The flame sensor is a single metal rod that sits in the burner flame of your Carrier PY1PNB060115AAAA furnace and proves to the control board that a flame is actually present. It works by flame rectification — the lit flame conducts a tiny microamp current the board can read. When the rod oxidizes, gets coated with carbon, or fails, the board can no longer sense flame and shuts the gas valve within seconds. The classic symptom: the burners light, run for 2–7 seconds, then go out and the furnace repeats the cycle (short-cycling) before locking out with no heat. This is a single-rod flame sensor with a high-temperature ceramic insulator and a spade terminal. A healthy sensor passes roughly 1–6 microamps DC of flame current (measured in series with a meter that reads µA); below ~0.5 µA the board drops out. The rod must be the correct length and bend so it sits properly in the flame envelope for this burner. OEM matters because rod geometry and alloy directly affect the microamp signal. A generic sensor that's too short, too long, or made of a lower-grade alloy oxidizes faster and produces a marginal signal, causing intermittent dropouts that are maddening to diagnose. This OEM rod restores a strong, stable flame current and the exact factory position. Install difficulty: 1/5. Tools needed: 1/4" nut driver; a multimeter set to microamps is optional for verification. #1 safety warning: shut off power at the breaker before servicing, and handle the new rod by its base — skin oils and abrasive pads can shorten its life. Never sand a new sensor. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1PNB060115AAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.