OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM — HC39GR234 for Model PY1PNB036090AAAA
This is the factory OEM condenser fan motor for the Carrier PY1PNB036090AAAA split-system air conditioner, replacing part number HC39GR234. The condenser fan motor drives the outdoor fan blade to exhaust heat from the refrigerant coil. When this motor fails, the condenser unit will overheat and trigger high-pressure cutout, causing the system to shut down and deliver no cooling — or the outdoor fan will simply stop spinning while the compressor continues to run, rapidly damaging it. Early warning signs include intermittent shutdowns on hot days, a humming outdoor unit with no fan movement, or visible motor burnout.
-
Specs: 1/4 HP | 208-230V | 1 Phase | 60 Hz | 1100 RPM | 1.5 Amps | Frame 48 | 1/2" shaft diameter | 1.5" shaft length | CWLE rotation | Vertical mount only
-
OEM vs Generic: This is a genuine Carrier OEM motor (GE/Genteq manufactured) built to exact factory tolerances. Generic aftermarket motors frequently deviate in shaft length, rotation direction, or thermal protection ratings — mismatches that can void your system warranty and lead to premature failure.
-
Install difficulty: 3/5 — Requires disconnecting high-voltage power at the disconnect box before starting. Tools needed: multimeter, 5/16" and 3/8" nut drivers, wire strippers, needle-nose pliers. Always photograph all wiring connections before removing the old motor. Note: it is strongly recommended to replace the run capacitor at the same time, as a failing capacitor is often the root cause of motor failure and can damage a new motor if left in place.
-
Warranty: 1-year OEM manufacturer warranty. Ships same business day from our warehouse when ordered before cutoff.
Compatibility: Direct OEM replacement for Carrier model PY1PNB036090AAAA (3-ton, 208-230V split-system condenser). Superseded by HC39GE238 — both part numbers are covered by this listing. Verify voltage, HP, and rotation direction on your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment prior to purchase.