OEM Carrier Furnace Flame Sensor Replacement for PY1PNA024060ADBA

The flame sensor confirms that your burners have actually ignited. Positioned in the burner flame, it relies on flame rectification to feed a minute electrical current back to the control board; if that current never appears, the board closes the gas valve within seconds to keep unburned gas from accumulating. As the sensing rod becomes coated or fatigued, you will see the furnace light briefly and then drop out, cycling on and off without sustaining heat, often paired with a flashing diagnostic code and cool air from the registers. This OEM flame sensor provides the correct stainless/Kanthal sensing rod, length, and bend geometry for the PY1PNA024060ADBA, with the factory ceramic insulator and terminal connection. On this furnace a clean sensor should carry about 1 to 6 microamps of DC flame current, and the OEM rod is built to hold that signal steady over years of cycling. Why OEM matters: because flame current is measured in millionths of an amp, even small differences in rod alloy, length, or insulator quality can push the reading below the board's lockout threshold. Generic sensors frequently oxidize faster or sit at the wrong depth in the flame, producing nuisance shutdowns on cold nights. An exact OEM sensor keeps the flame-proving signal above threshold so the furnace completes its full heat cycle. Install difficulty: 1 of 5. Tools needed: a 1/4-inch nut driver, fine emery cloth to polish the rod, and a multimeter set to DC microamps to read flame current. Number one safety warning: turn off the gas at the valve and cut power to the furnace before removing the sensor. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1PNA024060ADBA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.