OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PY1PJB048130NBAA

This is the factory-specified OEM condenser fan motor (part #HC39GR234) for the Carrier PY1PJB048130NBAA condensing unit. The condenser fan motor drives the fan blade that pulls air across the condenser coil to reject heat from the refrigerant. When this motor fails, the condenser loses airflow, refrigerant pressures spike, and the unit trips on high-pressure or thermal lockout — leaving you with no cooling. Common failure symptoms include the unit humming but the fan not spinning, the fan spinning slowly or intermittently, or the system shutting down shortly after startup due to overheating.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.50A | Frame 48Y (5 5/8" diameter) | 1/2" shaft diameter | 1.5" shaft length | Counter-Clockwise rotation (shaft up) | OEM Part # HC39GR234
• OEM vs Generic: This is the genuine Carrier factory-authorized motor wound and balanced to exact OEM specifications. Generic motors often deviate in rotation, shaft length, or amp draw — risking fan blade interference, premature bearing failure, or nuisance tripping. Don't gamble on a critical moving part.
• Install difficulty: 3/5 — Disconnect all power before servicing. Tools needed: 1/4" and 5/16" nut drivers, wire strippers, multimeter, and fan blade puller. Always photograph wiring and blade orientation before disassembly. Pro tip: replace the run capacitor at the same time — a weak capacitor is a leading cause of motor burnout and will shorten the life of your new motor.
• Warranty: 1-year OEM factory warranty against defects. In-stock and ships same business day from our climate-controlled warehouse.

Compatibility: Direct OEM replacement for Carrier model PY1PJB048130NBAA (4-ton packaged unit). Verify voltage, HP, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.