OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PY1PJB048130ABAA

This is the factory-specified OEM condenser fan motor for the Carrier PY1PJB048130ABAA split-system air conditioner, manufactured by GE Genteq to Carrier's exact tolerances. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, dissipating heat and allowing the refrigerant to condense properly. When this motor fails, the outdoor fan stops spinning — causing the compressor to overheat, trip its high-pressure limit, and shut the system down entirely. Common failure signs include a humming outdoor unit with no fan movement, a burning smell from the condenser cabinet, or repeated high-pressure lockouts.

• Specs: 1/4 HP | 208-230V | 1100 RPM | 1.5 Amps | 1-Phase, 60 Hz | Frame 48Y (5-5/8" diameter) | 1/2" shaft diameter | 1.5" shaft length | Counter-Clockwise rotation (CWLE) viewed from shaft end | 3-wire lead configuration
• OEM vs Generic: This OEM Carrier/GE Genteq motor is wound to factory MFD and torque specs, ensuring correct RPM under load and proper airflow across the condenser coil. Generic motors often deviate in shaft length or rotation direction, creating fitment and performance issues that lead to premature compressor wear.
• Install difficulty: 3/5 — Discharge and lock out power before beginning. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers, multimeter. Photograph all wiring connections before disconnecting. Note fan blade pitch and orientation before removal — reinstall blade at the same depth on the shaft. Recommend replacing the run capacitor at the same time as the motor to prevent early re-failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PY1PJB048130ABAA (4-ton, 208-230V split-system condenser). Replaces OEM part number HC39GR234. Also cross-references HC39GR234A and GE Genteq model 5KCP39GGY910S. Verify voltage, HP, and rotation on your unit's data plate before ordering — our fitment team is available to confirm compatibility prior to purchase.