OEM Carrier Condenser Fan Motor HC39GE468 — 1/4 HP 460V for Model PY1PEB060130AAAA

This is the factory-authorized OEM replacement condenser fan motor for the Carrier PY1PEB060130AAAA commercial packaged unit. The condenser fan motor drives the fan blade that pulls ambient air across the condenser coils, dissipating heat from the refrigerant and preventing compressor overload. When this motor fails, the condenser cannot reject heat — resulting in high head pressure, compressor short-cycling, nuisance lockouts, or a complete loss of cooling. Common failure symptoms include the outdoor fan not spinning, the unit running briefly before shutting down on a high-pressure fault, or audible grinding and humming from the condenser section.

• Specs: 1/4 HP | 460/400V | 60/50 Hz | 0.7A | 1100/900 RPM | Single Phase | Closed Enclosure | CW Rotation | 1.5" Shaft Diameter | Frame 48Y (5-5/8" diameter)
• OEM vs Generic: This is a genuine Carrier OEM motor (superseded part HC39GE468A) built to exact factory tolerances. Aftermarket motors may deviate in RPM, rotation direction, or shaft length — risking fan blade clearance issues, vibration damage, and voided equipment warranties on commercial units.
• Install Difficulty: 3/5 — Requires disconnecting 460V power at the disconnect box before any work begins. Tools needed: multimeter (verify power is off), 5/16" and 3/8" nut drivers, needle-nose pliers, and wire nuts or spade connectors. Photograph all wiring before disconnecting. Always check the fan blade for balance and wear before reinstalling — an unbalanced blade accelerates premature motor failure. Strongly recommended: replace the dual-run capacitor at the same time.
• Warranty: 1-year OEM factory warranty. In-stock orders ship same business day from our warehouse.

Compatibility: Engineered as the factory-specified replacement for Carrier PY1PEB060130AAAA packaged units. OEM part number HC39GE468 (current successor: HC39GE468A). Also cross-references GE/Genteq part numbers 5KCP39KFV110AS and 5KCP39MFS303BS. Verify voltage (460V — not standard 208/230V residential) and rotation against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy.