OEM Carrier Contactor 2-Pole 24V Coil for Model PY1PEB060115AAAA

This is the OEM factory-specified contactor for the Carrier PY1PEB060115AAAA packaged unit. The contactor is the high-voltage relay that the thermostat's 24V control signal energizes to switch line voltage to the compressor and condenser fan motor. When this part fails, the most common symptoms are the system not turning on at all, the compressor humming but not starting, or visible pitting and burning on the contact points. Replacing the contactor is one of the most common and cost-effective HVAC repairs you can perform.

• Specs: 2-Pole design | 24V coil voltage | Factory-matched amperage rating | Direct OEM replacement part number HN52KC025
• OEM vs Generic: This OEM contactor uses factory-spec contact material and spring tension, ensuring precise pull-in voltage and long contact life. Generic contactors often use inferior contact alloys that pit and burn faster, shortening replacement intervals and risking compressor damage.
• Install difficulty: 2/5 — Always disconnect power at the breaker and verify zero voltage with a multimeter before beginning. Tools needed: flathead and Phillips screwdrivers, 1/4" nut driver, needle-nose pliers, multimeter. Photograph all wiring connections before removing the old contactor.
• Warranty: 1-year OEM factory warranty against defects. Orders placed before cutoff ship same business day from our NationalHVACParts.com warehouse.

Compatibility: Engineered and factory-matched for the Carrier PY1PEB060115AAAA packaged unit. Always confirm the OEM part number printed on your existing contactor's label matches HN52KC025 before ordering. Have questions about fitment? Our technical team is available to verify compatibility before you buy — same-day shipping available on all in-stock orders.