OEM Carrier Contactor 2-Pole 24V Coil for Model PY1PEB048130AAAA

This OEM replacement contactor (part number HN52KC025) is the factory-specified switching relay for the Carrier PY1PEB048130AAAA packaged unit. The contactor is the high-voltage relay that receives a 24V signal from the thermostat and closes the circuit to energize the compressor and condenser fan motor. When it fails — due to burned or pitted contacts, a stuck plunger, or a failed coil — the system will either refuse to start, fail to shut off, or exhibit erratic cycling behavior.

• Specs: 2-Pole configuration | 24V AC coil voltage | Heavy-duty contact rating | Factory OEM HN52KC025 replacement — exact fit, no modifications required
• OEM vs Generic: This is a genuine OEM Carrier contactor built to factory specifications. Generic contactors often use thinner contact material and lower-grade coils, leading to premature pitting, arcing, and repeat failures — especially in high-cycle cooling seasons.
• Install Difficulty: 2/5 — Always shut off power at the disconnect and breaker before beginning work. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter, wire labels or tape. Photograph all wiring terminals before disconnecting. The contactor snaps or screws into the control panel; swap wires one at a time to avoid miswiring.
• Warranty: 1-year OEM factory warranty against defects. In stock and ships same business day from our warehouse when ordered before 3 PM EST.

Compatibility: Designed as a direct OEM replacement for the Carrier PY1PEB048130AAAA packaged unit. Always confirm coil voltage and pole configuration on your unit's data plate or wiring diagram before ordering. Our technical team is available to verify fitment — contact us before you buy for complete peace of mind.