OEM Carrier Hot Surface Igniter for PY1PEB048115ABAA Furnace

The hot surface igniter glows red-hot when energized and lights the gas at the burners on every heating call. When it fails, the furnace will run through its sequence, the inducer spins and the gas valve attempts to open, but no flame appears and you get cold air or no heat at all. After three failed tries the control board usually locks the unit out. A cracked, chipped, or visibly worn element, or an igniter that no longer glows, confirms the failure. This is a 120V hot surface igniter. Carrier units commonly use a durable silicon nitride element, while older designs use brittle silicon carbide; silicon carbide igniters typically read roughly 40-75 ohms cold, and a reading that is open or far out of range means replacement. When ordering, match the element material, mounting bracket, and plug/connector style to the original. Why OEM here? An igniter with the wrong resistance draws the wrong current and either never reaches the ~2000F needed to light gas reliably or overheats and burns out prematurely. Generic igniters are often mismatched to the control board's timing and voltage profile, leading to repeat failures. The OEM igniter is matched to your furnace's ignition sequence for dependable lights and long life. Install difficulty: 2 of 5. Tools: 1/4-inch nut driver and a multimeter. #1 safety warning: turn off the gas supply and kill power at the breaker before servicing, and never touch the igniter element with bare fingers; skin oils create hot spots that crack the element on the next heat cycle. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1PEB048115ABAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.