OEM Carrier Condenser Fan Motor 1/4 HP 460V for Model PY1PEB048090NBAA

This OEM condenser fan motor is the factory-specified replacement for the Carrier PY1PEB048090NBAA packaged unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and maintain safe operating pressures. When this motor fails, the condenser coil overheats, refrigerant pressures spike, and the system trips on high-pressure lockout — leaving you with no cooling. Common failure signs include a humming outdoor unit with a stationary fan, intermittent high-pressure trips, or a motor that runs hot and shuts off on thermal overload.

• Specs: 1/4 HP | 460/400V | 60/50 Hz | 0.70 Amps | 1100/900 RPM | Frame 48Y (5-5/8" diameter) | 1.5" shaft | Closed enclosure | Single phase | CW rotation (shaft up)
• OEM vs Generic: This genuine Carrier Factory Authorized Part is engineered to exact factory tolerances — same winding temperatures, shaft length, and mounting footprint as the original. Generic motors often deviate in RPM and airflow, reducing system efficiency and stressing the compressor.
• Install difficulty: 3/5 — Shut off all power at the disconnect and verify zero voltage before beginning. Tools needed: multimeter, 5/16" and 3/8" nut drivers, needle-nose pliers, wire stripper, and a capacitor discharge tool. Photograph all wiring connections before removal. Note shaft rotation direction before ordering — confirm CW when viewed from shaft end.
• Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse.

Compatibility: Designed for the Carrier PY1PEB048090NBAA packaged unit. Also cross-references GE/Genteq part numbers 5KCP39KFV110AS and 5KCP39MFS303BS. Always verify voltage (460V), HP, RPM, and rotation direction against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you order if you have any questions.