OEM Carrier 2-Pole Contactor 24V Coil for Model PY1PEB042060AAAA

This is the OEM factory-specified contactor for the Carrier PY1PEB042060AAAA packaged heat pump unit (OEM Part # HN52KC025). The contactor is the high-voltage relay that bridges your 24V thermostat control circuit to the 240V compressor and condenser fan power circuit. When the thermostat calls for cooling or heating, the 24V coil energizes and closes the contacts, sending line voltage to the compressor. A failed contactor is one of the most common reasons a packaged unit will not start — symptoms include the system humming without compressor engagement, burned or pitted contacts visible on inspection, or the unit simply not responding to thermostat calls.

• Specs: 2-Pole configuration | 24V AC coil voltage | 30A contact rating | Direct OEM replacement — Part # HN52KC025 | Factory-matched contact alloy for maximum arc resistance
• OEM vs Generic: This OEM contactor uses factory-spec contact plating and coil wire gauge. Generic contactors frequently use lower-grade contact alloys that pit and weld faster under compressor inrush current, shortening service life significantly.
• Install difficulty: 2/5 — Shut off power at the disconnect box AND the breaker before servicing. Tools needed: flathead and Phillips screwdrivers, needle-nose pliers, multimeter. Always photograph all wiring connections before removing the old contactor to ensure correct reinstallation.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered specifically for the Carrier PY1PEB042060AAAA packaged heat pump unit. Confirm OEM part number HN52KC025 and coil voltage on your unit's data plate before ordering. Not sure if this part fits your unit? Our HVAC parts specialists verify fitment before you order — just reach out.