OEM Carrier Hot Surface Igniter for PY1PEB036090ABAA Furnace

The hot surface igniter lights the burners on your Carrier PY1PEB036090ABAA furnace. On every heat call the control board sends voltage to this element until it glows white-hot, igniting gas the instant the valve opens. As it ages and micro-cracks form, ignition becomes unreliable — the homeowner sees a furnace that clicks and runs the inducer but blows cold air, short-cycles after a failed light, or locks out entirely and flashes a fault code. Failures cluster on the coldest days when the furnace runs most. This is an OEM silicon carbide hot surface igniter built to Carrier spec for the PY1PEB platform. Cold resistance typically reads in the 40–90 ohm band for these 120V SiC elements; check with a multimeter, and an open (OL) reading or a value well outside range confirms the igniter is done. Silicon carbide is robust thermally but mechanically brittle — skin oils and rough handling shorten its life sharply. Why OEM matters: aftermarket SiC igniters often arrive with looser resistance tolerance and thinner carbide that fails to reach or hold ignition temperature, producing intermittent no-heat calls. An out-of-spec igniter also pulls the wrong current through the board's igniter relay, accelerating board wear. The OEM element matches the original glow time and current draw the board is timed around. Install difficulty: 2/5. Tools: 1/4" nut driver, multimeter. SAFETY: shut off the gas and the furnace breaker before servicing, and handle the new igniter only by its ceramic base — never touch the carbide element with bare fingers. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1PEB036090ABAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.