OEM Carrier Flame Sensor for PY1PEB036060NBAA Gas Furnace

The flame sensor is the safety device that proves a flame is actually present in your Carrier PY1PEB036060NBAA after the igniter lights the burners. It uses flame rectification — a tiny microamp current conducted through the flame to the control board. If the board doesn't sense that current within a few seconds, it shuts off the gas valve to prevent raw gas from building up. When the sensor gets coated with oxidation or carbon, that signal drops and you get the hallmark symptom: the furnace lights, runs for 3-7 seconds, then shuts down and tries again — short-cycling, intermittent no-heat, and eventually a lockout fault. This is a single-rod flame sensor built around a Kanthal/stainless steel sensing rod with a high-temperature ceramic insulator and a porcelain base rated for the burner flame envelope. A healthy sensor reads a flame current in the 1-6 microamp range; readings under ~0.5 microamps indicate a fouled or failing rod. OEM matters because the rod alloy, length, and insulator placement are matched to your burner geometry. Generic sensors with the wrong rod position or lower-grade insulators sit in the wrong part of the flame, read weak current, and trip the same short-cycle fault you're trying to fix — or degrade quickly under heat. Installation difficulty: 1 of 5. Tools needed: 1/4" nut driver, fine emery cloth or steel wool (to clean the new rod's seating area, never sand the new rod), and a multimeter capable of reading microamps to verify flame current. SAFETY: turn off the gas supply and the furnace power/breaker before removing the sensor near the burner assembly. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1PEB036060NBAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.