OEM Carrier Hot Surface Furnace Igniter for PY1PEA036120ACBA

The hot surface igniter is the component that actually lights the gas in your Carrier PY1PEA036120ACBA package unit. On each heat call the control board sends voltage to the igniter, it glows white-hot, and the gas valve opens to ignite the burners against it. Because it heats and cools on every cycle, it is one of the most common no-heat failures. When it cracks or wears out you'll get cold air from the registers, a unit that clicks and tries to fire but never lights, repeated ignition attempts ending in a hard lockout, or a furnace that runs the inducer and blower but produces no heat. This is a hot surface igniter rated for the standard 120V furnace circuit. Carrier units of this generation use a silicon nitride element, which is far more rugged and impact-resistant than older silicon carbide igniters that crack from thermal shock and rough handling. A healthy element reads roughly 40–90 ohms cold on a multimeter; an open (infinite) reading or visible crack means replacement. Why OEM: a generic igniter with the wrong resistance or element mass simply won't reach light-off temperature reliably, causing intermittent no-light conditions, and cheaper silicon carbide replacements are brittle and short-lived. The genuine Carrier silicon nitride igniter matches the board's voltage timing and current draw exactly. Install difficulty: 2 of 5. Tools: 1/4" nut driver, Phillips screwdriver, and a multimeter to confirm resistance. #1 safety warning: TURN OFF THE GAS and kill power at the breaker before servicing; never touch the ceramic element with bare fingers — skin oils create hot spots that crack it. Ships same business day from our stocked warehouse on orders before 3 PM CST. 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PY1PEA036120ACBA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.