Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Dual Run Capacitor 55+5 MFD 370V for PH4RNG042000BBAA
Carrier

OEM Carrier Dual Run Capacitor 55+5 MFD 370V for PH4RNG042000BBAA

SKU: CARRIE-PH4RNG042000BBAA-CAPACITOR-P291-5553RS Brand: Carrier
Guaranteed to fit PH4RNG042000BBAA — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Dual Run Capacitor 55+5 MFD 370V for Model PH4RNG042000BBAA

This is the factory-specified OEM dual run capacitor (part number P291-5553RS) for the Carrier PH4RNG042000BBAA packaged heat pump unit. The dual run capacitor stores and releases the electrical charge required to start and sustain both the compressor and the condenser fan motor simultaneously. When this capacitor degrades or fails, you'll notice classic symptoms: a low humming sound with no motor movement, the system short-cycling within the first few minutes of operation, or the unit tripping the breaker under starting load. Left unaddressed, a weak capacitor places severe strain on the compressor — potentially leading to a far more costly repair. This unit also uses a companion start capacitor P281-8806 (88–108 MFD, 330V) to assist the compressor during startup; both capacitors should be inspected together and replaced as a set whenever either one shows signs of failure.

  • Specs — Dual Run Capacitor (P291-5553RS): 55+5 MFD (microfarad) | 370V rated (440V-rated replacement P291-5554RS also fits) | Round case | ±5% factory tolerance | AFC 10,000 protected, no-PCB design
  • Specs — Start Capacitor (P281-8806): 88–108 MFD | 330V | With bleed resistor | 2.06″ diameter × 4.37″ height — verify both parts on your unit's data plate before ordering
  • OEM vs Generic: OEM capacitors are manufactured to Carrier's exact tolerance specifications. Aftermarket units commonly run ±10% MFD deviation, which accelerates motor winding stress and shortens compressor life — especially critical in a packaged unit where service access is limited.
  • Install Difficulty: 2/5 — Always discharge capacitors fully before handling (a charged capacitor can retain lethal voltage). Tools needed: 1/4″ nut driver, insulated needle-nose pliers, multimeter (capacitance mode). Photograph all wiring before disconnecting terminals. 1-year OEM warranty included. Ships same business day from our warehouse.

Compatibility: Engineered for the Carrier PH4RNG042000BBAA packaged heat pump unit. Note that P291-5553RS (370V) has been superseded by P291-5554RS (370/440V dual-rated), which is the current OEM-equivalent shipment. Confirm MFD rating and voltage on your unit's data plate before installing. Questions about fitment? Our HVAC parts team verifies compatibility before every order — reach out and we'll confirm the right part ships to you today.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my Carrier PH4RNG042000BBAA?
Yes. This is the factory-specified OEM capacitor for the Carrier PH4RNG042000BBAA. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my Carrier PH4RNG042000BBAA?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online