OEM Carrier Definite Purpose Contactor Relay for PH4ANG036000BDAA

The contactor is the high-voltage switch that energizes the compressor and outdoor fan motor on your Carrier PH4ANG036000BDAA heat pump. A 24V signal from the thermostat circuit pulls the coil in, closing the contacts to send 240V line power to the condenser. When it fails, the outdoor unit won't start, you'll hear a persistent hum or buzz at the condenser, the contacts chatter as the coil struggles to seat, or the unit short-cycles. Welded contacts can also leave the compressor running continuously after the thermostat is satisfied. This is a definite-purpose contactor built for HVAC compressor duty, with a 24VAC coil and silver-alloy contacts rated to handle the locked-rotor inrush of the 3-ton PH4ANG compressor. Pole count and contact amperage match the factory spec for this model so the unit pulls in cleanly and holds without drop-out. Why OEM matters here: cheap aftermarket contactors often use undersized contacts that pit and arc prematurely, causing voltage drop to the compressor windings, contact welding, and shortened compressor life. An OEM-rated contactor delivers full line voltage and survives the high make-break cycle count this equipment demands. Install difficulty: 2 of 5. Tools needed: 1/4" and 5/16" nut driver, insulated screwdriver, and a multimeter to check coil continuity. #1 SAFETY WARNING: shut off the outdoor disconnect and the breaker before touching the contactor — these terminals carry 240V and stay live even with the thermostat off. Photograph and label the wiring before removal. Ships same business day from a stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH4ANG036000BDAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.