OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH3ZPA036000AA

This OEM condenser fan motor (part number HC39GR234) is the factory-specified replacement for the Carrier PH3ZPA036000AA split-system condensing unit. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to dissipate heat from the refrigerant. When this motor fails, the condenser coil overheats, triggering high-pressure lockout — leaving your system unable to cool. Common symptoms include the outdoor fan not spinning while the compressor hums, the unit shutting off within minutes of startup, or a seized/seized-bearing grinding noise from the outdoor cabinet.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | Shaft Diameter 0.5" | Shaft Length 1.5" | Counterclockwise Leading Edge (CWLE) rotation | Vertical mount only
• OEM vs Generic: This factory OEM motor is wound and balanced to exact Carrier tolerances, ensuring correct airflow, vibration levels, and thermal protection settings. Generic motors often run outside rated RPM and amperage specs, shortening compressor life and voiding equipment warranties.
• Install difficulty: 3/5 — Requires disconnecting high-voltage power at the disconnect box before any work begins. Tools needed: multimeter, 5/16" and 3/8" nut drivers, wire stripper, needle-nose pliers, and blade balancer. Always verify and replace the run capacitor at the same time — a weak capacitor is the leading cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. Ships same business day from our warehouse when ordered before cutoff.

Compatibility: Direct OEM replacement for Carrier model PH3ZPA036000AA condensing units. Note: HC39GR234 has been superseded by HC39GE238 — both part numbers are cross-referenced and functionally identical. Always verify horsepower, voltage, RPM, and rotation direction against your unit's data plate before installation. Our HVAC parts specialists are available to confirm fitment — contact us before ordering if you have any questions.