OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM for Model PH3PNA024000AA

This is the genuine OEM replacement condenser fan motor for the Carrier PH3PNA024000AA heat pump. The condenser fan motor drives the outdoor unit's fan blade, pulling air across the condenser coil to reject heat and maintain system efficiency. When this motor fails, the outdoor fan stops spinning — causing the compressor to overheat, triggering high-pressure lockout, and resulting in a complete no-cool or no-heat condition. Left unaddressed, a failed condenser fan motor can permanently damage the compressor.

• Specs: 1/8 HP | 825 RPM | 208–230 VAC | 1-Phase | 0.90 A | 60 Hz | PSC (Permanent Split Capacitor) | Clockwise rotation | Continuous duty | Replaces HC35GE235A & GE Genteq 5KCP39FFS244CS
• OEM vs Generic: This factory-authorized Carrier part is engineered to exact HP, RPM, and rotation specifications for the PH3PNA024000AA. Generic motors often deviate in RPM or amp draw, reducing airflow efficiency and risking compressor overload — OEM is always the safer long-term investment.
• Install Difficulty: 3/5 — Requires safely discharging the system and isolating power at the disconnect. Tools needed: nut driver set, adjustable wrench, multimeter, wire stripper. Always photograph the original wiring harness before disconnecting. Pro tip: Replace the run capacitor at the same time — a weak capacitor is often the root cause of motor failure and can prematurely burn out a new motor.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Designed for the Carrier PH3PNA024000AA heat pump. Verify the motor HP, RPM, voltage, and rotation direction on your unit's data plate before ordering to ensure a correct fit. Our HVAC parts specialists are available to confirm fitment — reach out before you order if you have any questions. Order today and get your system back up and running fast with same-day shipping available.