OEM Carrier Run Capacitor for PH3ANA036000BBAA Heat Pump Unit

The run capacitor is the energy-storage component that gives your Carrier PH3ANA036000BBAA heat pump the steady phase shift it needs to keep the compressor and condenser fan motor turning smoothly. It holds and releases a charge on every cycle, so when it weakens or fails you'll notice the unit humming but not starting, the fan hesitating or spinning slowly, warm air instead of cool, short-cycling on hot afternoons, or a tripped breaker as the compressor draws locked-rotor amps trying to start without it. A bulging, domed, or leaking can is a sure sign it's done. This is a dual-run capacitor matched to the factory specification for this unit, with separate HERM (compressor) and FAN terminals. It carries the correct microfarad (MFD) values and a 440 VAC rating, held to a tight OEM ±5% tolerance, and is built with a metalized polypropylene dielectric and an internal pressure-interrupter for safety. Always confirm the MFD and voltage stamped on your old capacitor before ordering. Why OEM matters here: generic capacitors often ship with a loose ±10–15% tolerance and lower-temperature dielectrics. A capacitor even a few MFD off forces the compressor windings to run hotter and pull more current, shortening the life of the most expensive part in the system. OEM-spec parts hold their rating for years instead of months. Install difficulty: 2 of 5. Tools: 1/4" and 5/16" nut driver, insulated needle-nose pliers, and a multimeter with a capacitance test. SAFETY: a capacitor stores a lethal charge even with power off — discharge it across the terminals with an insulated screwdriver and kill the disconnect before touching any wire. Ships same business day from our stocked warehouse on orders placed before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH3ANA036000BBAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.