OEM Carrier Definite Purpose Contactor for Model PH3ANA030000BAAA

The contactor is the heavy-duty switch that delivers 240V line power to the compressor and outdoor fan motor whenever your Carrier PH3ANA030000BAAA heat pump answers a thermostat call. A failed contactor most often shows up as an outdoor unit that will not start — the indoor blower runs, but the condenser sits silent with no heating or cooling. Other tell-tale signs include a steady hum or buzz from the outdoor cabinet, fast clicking or chattering as the contacts fail to pull in, a unit that runs continuously because the contacts have welded shut, and sometimes a scorched smell or visible pitting on the contact points. Worn contacts can also cause intermittent operation and nuisance breaker trips. This definite-purpose contactor is rated for the 2.5-ton (030) outdoor section, using a 24VAC pull-in coil and a 30–40 FLA contact rating in a one- to two-pole layout. Carrier OEM units use silver-cadmium-oxide contacts and a tightly matched coil voltage so the relay seats firmly and quietly. Generic contactors often cut costs with thinner, lower-grade contacts that pit and erode quickly under repeated compressor inrush, leading to premature failure and the danger of a welded-closed contact that runs the compressor non-stop. An off-spec coil can buzz or only partially engage, arcing the contacts. Install difficulty: 2/5. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, a multimeter, and a phone to document wire positions. #1 safety warning: open the 240V disconnect AND turn off the indoor breaker before service — the line-side lugs remain energized even with the system off. Ships same business day from our stocked warehouse on orders before 3 PM CST. Covered by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH3ANA030000BAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.