Same-day shipping before 3PM CST · 35,000+ OEM Parts · Texas CMBL & SAM.gov Registered · Government POs Accepted

Menu

Home Shop All Account Cart
OEM Carrier Dual 40+5 MFD Run Capacitor for Model PH3ANA030000BAAA Unit
Carrier

OEM Carrier Dual 40+5 MFD Run Capacitor for Model PH3ANA030000BAAA Unit

SKU: CARRIE-PH3ANA030000BAAA-CAPACITOR-P281-1766 Brand: Carrier
Guaranteed to fit — or your money back. Terms

OEM Guaranteed

Same-Day Ship

30-Day Returns

Secure Checkout

Texas CMBL #19328542014
SAM.gov Registered
Govt POs Accepted

OEM Carrier Dual Run Capacitor for Model PH3ANA030000BAAA Unit

The dual run capacitor gives both the compressor and the outdoor fan motor the extra phase-shifted torque they need to keep running smoothly in your Carrier PH3ANA030000BAAA heat pump. It is the single most common failure point in any outdoor unit. When it weakens or fails, you'll notice the outdoor fan won't spin (or needs a push to start), the compressor hums loudly but won't start and trips the breaker on overload, the unit short-cycles, or the system blows warm air while the condenser struggles. A bulged or domed top, leaking oil, or a swollen can is a sure visual sign the capacitor is done. This is a dual-rated run capacitor — typically 35/5 or 40/5 MFD at 370/440VAC for the 030 platform (always confirm the printed MFD and voltage on your old can before ordering). Carrier OEM capacitors are held to a tight ±5% tolerance and full voltage rating so both windings receive the precise microfarad value they were engineered for. Generic aftermarket capacitors are frequently sold at ±10–15% tolerance and with thinner foil and lower temperature ratings. A capacitor even slightly out of spec under-energizes the compressor start winding, causing it to draw excess current, run hot, and shorten compressor life dramatically — an expensive failure to chase a few dollars of savings. Install difficulty: 2/5. Tools needed: insulated 1/4" nut driver, needle-nose pliers, and a multimeter with capacitance (MFD) mode. #1 safety warning: a capacitor stores a lethal charge even with power off — discharge it across a 20k-ohm resistor (or insulated screwdriver) and kill the 240V disconnect before touching the terminals. Ships same business day from our stocked warehouse on orders before 3 PM CST. Covered by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.

Compatibility

This part is compatible with Carrier model PH3ANA030000BAAA. Always verify the part number against your unit's data plate before ordering.

Why Choose OEM?

OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.

Shipping & Returns

Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.

Shipping Information

  • Orders placed before 3PM CST ship same business day
  • Standard delivery: 2-5 business days
  • Express shipping available at checkout
  • Free shipping on orders over $99
  • Tracking number emailed upon shipment

Return Policy

  • 30-day returns on unused parts in original packaging
  • Electrical parts (capacitors, contactors, control boards) are final sale once installed
  • Email info@nationalhvacparts.com to initiate a return
  • Refunds processed within 5-7 business days

Frequently Asked Questions

Does this Capacitor fit my Carrier Model PH3ANA030000BAAA Unit?
Yes. This is the factory-specified OEM capacitor for the Carrier Model PH3ANA030000BAAA Unit. It is a direct drop-in replacement that fits without modification. Always verify the model number on your equipment nameplate before ordering.
How do I replace the capacitor on my Carrier Model PH3ANA030000BAAA Unit?
Difficulty: Easy (20–30 min)
Step 1: Turn off power at breaker. Step 2: Open condensing unit panel. Step 3: Photograph the old capacitor wiring (Common/Herm/Fan). Step 4: Discharge old capacitor with insulated screwdriver. Step 5: Disconnect and remove old capacitor. Step 6: Mount new capacitor, reconnect wires to matching terminals. Step 7: Close panel, restore power, test. Tools: screwdriver, needle-nose pliers.
My AC hums but won’t start. What part do I need?
An AC that hums but won’t start is the classic symptom of a failed capacitor. The capacitor provides the electrical boost to start the compressor. When it fails, you hear humming but the motor can’t overcome inertia. Other symptoms: fan spinning slowly, AC cycling on/off rapidly, or a visibly swollen capacitor. Fix: replace capacitor ($15–$80 DIY, 30 min).
Is this capacitor compatible with Bryant or Payne too?
Many Carrier parts are cross-compatible with Bryant and Payne since all three brands are manufactured by Carrier Global Corporation. The same physical part is often used across brand labels with different model numbers. To verify: check your Bryant or Payne equipment service manual for cross-compatible part numbers, or email info@nationalhvacparts.com with your model number.
Should I use OEM or aftermarket for my Carrier capacitor?
OEM strongly recommended. OEM capacitors have ±6% MFD tolerance vs aftermarket ±10%. The looser tolerance causes motor winding stress, higher temps, and shorter compressor life. Price difference is only $10–$20 — OEM is the clear value choice.
How fast does National HVAC Parts ship?
Orders placed before 3:00 PM CST ship the same business day. Standard delivery is 2–5 business days anywhere in the continental United States. Express shipping available at checkout. We ship from Houston, TX to all 50 states. 30-day return policy on all parts.
Home Shop Search Account Cart
Fitment Guaranteed
MR
Mike Rivera
HVAC Parts Specialist — Online