OEM Carrier Condenser Fan Motor 1/4 HP 1100 RPM for Model PH2PPB036000AA

This is the genuine OEM factory-specified condenser fan motor (part number HC39GR234) for the Carrier PH2PPB036000AA split-system heat pump condenser. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and maintain proper refrigerant pressures. When this motor fails, the outdoor fan stops spinning — leading to compressor overheating, high-pressure lockouts, and a complete loss of cooling or heating capacity. Common failure symptoms include the outdoor unit humming without the fan spinning, intermittent shutdowns on high-pressure fault, or a seized motor that trips the contactor.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | CWLE rotation | Frame 48 | 1/2" shaft diameter | 1.5" shaft length | Vertical mount only
• OEM vs Generic: This is the genuine Carrier/GE Genteq factory part (model 5KCP39GGY910S), wound and balanced to exact OEM tolerances. Aftermarket motors often deviate in rotation direction, shaft dimensions, or RPM — causing fan blade incompatibility or premature bearing failure.
• Install difficulty: 3/5 — Disconnect power at the disconnect box and verify zero voltage with a multimeter before proceeding. Tools needed: 1/4" and 5/16" nut drivers, wire strippers, needle-nose pliers, and a multimeter. Photograph all wiring and rotation arrow on the old motor before removal. Note: This motor is vertical mount only — confirm mounting orientation before installation.
• Warranty & Shipping: 1-year OEM factory warranty against defects. Ships same business day from our warehouse. Pro tip: Always replace the run capacitor when installing a new condenser fan motor — a weak capacitor is the #1 cause of premature motor failure.

Compatibility: Engineered as the direct OEM replacement for Carrier PH2PPB036000AA heat pump condensers. Verify HP, voltage, RPM, rotation, and shaft dimensions against your unit's data plate before ordering. Our HVAC parts specialists are available to confirm fitment — contact us before you buy for guaranteed accuracy. In stock and ready to ship today.