OEM Carrier Condenser Fan Motor 1/8 HP 825 RPM for Model PH2PNB042000AA

This is the OEM factory-specified condenser fan motor (part number HC35GE235) for the Carrier PH2PNB042000AA heat pump system. The condenser fan motor drives the outdoor unit's fan blade, pulling air across the condenser coil to reject heat during cooling and absorb heat during heating. When this motor fails, you'll typically see the outdoor fan stopped or spinning sluggishly, the compressor overheating and tripping on high-pressure lockout, or the system shutting down entirely to protect itself. Acting quickly prevents compressor damage — the most expensive repair in any HVAC system.

• Specs: 1/8 HP | 825 RPM | 208–230V | 60 Hz | 0.90A | Single Phase | PSC (Permanent Split Capacitor) | Clockwise rotation | 48Y frame (5-5/8" diameter) | 2.5" shaft extension | 3-wire lead configuration
• OEM vs Generic: This is a genuine Carrier OEM motor wound to exact factory tolerances for RPM, amperage draw, and rotation direction. Aftermarket motors frequently ship with incorrect rotation, mismatched RPM ratings, or inferior insulation that leads to repeat failures — especially in heat pump applications running year-round.
• Install difficulty: 3/5 — Shut off power at the disconnect and breaker before beginning. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, needle-nose pliers, multimeter. Always photograph all wiring connections before disconnecting. Note fan blade pitch and orientation before removal. Pro tip: Replace the run capacitor at the same time — a degraded capacitor is a leading cause of motor burnout and can take out your new motor prematurely.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our warehouse — get your system back online fast.

Compatibility: Engineered as the direct factory replacement for Carrier model PH2PNB042000AA. Cross-references include GE/Genteq 5KCP39FFS244CS and superseded suffix HC35GE235A. Verify horsepower, RPM, voltage, and rotation direction against your unit's motor data plate before ordering. Our HVAC parts specialists are available to confirm fitment — reach out before you order if you have any questions.