OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH2PNB036000AA

This OEM condenser fan motor (part# HC39GR234) is the factory-specified replacement for the Carrier PH2PNB036000AA split-system heat pump condenser. The condenser fan motor drives the outdoor fan blade to pull air across the condenser coil, rejecting heat from the refrigerant. When it fails, the outdoor unit overheats, trips the high-pressure limit, and shuts down — leaving you with no cooling or heating. Common symptoms include the outdoor fan not spinning, the compressor cycling off on high-pressure lockout, or a buzzing noise with no fan movement.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | Frame 48 | 0.5" shaft diameter | 1.5" shaft length | CWLE (Clockwise Leading Edge) rotation | Vertical mount only
• OEM vs Generic: This factory Carrier/GE-Genteq motor is wound to exact torque and thermal protection specs. Generic motors often use lower-grade bearings and looser thermal cutout tolerances, resulting in premature re-failure — especially in high-ambient summer conditions.
• Install difficulty: 3/5 — Requires disconnecting power at the breaker and capacitor discharge before removal. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and a capacitor discharge tool. Important: Always replace the run capacitor when replacing the motor — a weak capacitor is a leading cause of early motor failure.
• Warranty: 1-year OEM factory warranty against defects. Ships same business day from our climate-controlled warehouse.

Compatibility: Engineered specifically for the Carrier PH2PNB036000AA (3-ton heat pump condenser). Verify shaft diameter (0.5"), rotation (CWLE), and HP on your unit's data plate before ordering. Cross-reference GE-Genteq model 5KCP39GGY910S. Our fitment team is available to verify compatibility before you order — no guesswork.