OEM Guaranteed
Same-Day Ship
30-Day Returns
Secure Checkout
The run capacitor is the energy-storage component that keeps the condenser fan motor and compressor in your 3-ton Carrier PH2PNB036000AA heat pump running smoothly once they're started, supplying the steady phase-shifted voltage these motors need to hold torque. When it fails, you'll hear and see the textbook signs: a loud hum or buzz at the outdoor unit, a condenser fan that won't start on its own (or that only spins when nudged), warm air from the registers during cooling, hard starting, repeated short-cycling, and a breaker tripping as the compressor draws locked-rotor amps. A bulged or leaking top confirms it. This dual-run capacitor is made to OEM specification with a precise ±5% capacitance tolerance and a 370/440 VAC rating, sized to match the original Carrier component for this model. The microfarad (MFD/µF) value and voltage must match your unit's data plate exactly — even a small deviation shifts the motor phase angle and raises operating temperature. With capacitors, tolerance is everything. Generic aftermarket caps frequently ship at ±10–15% and use cheaper, lower-temperature dielectric film, so they drift out of spec and fail early in a hot outdoor cabinet. A capacitor feeding the wrong MFD stresses the compressor's start and run windings, raises amp draw, and can shave years off compressor life — far costlier than the cap itself. The genuine OEM part holds its rated value for its full service life. Install difficulty: 2/5. Tools: 1/4" nut driver, insulated needle-nose pliers, and a multimeter with a capacitance setting. #1 safety warning: a charged capacitor stores a lethal shock even after power is removed — kill the breaker AND discharge the capacitor across its terminals through an insulated resistor before touching the leads. Photograph the wiring first. Ships same business day from our stocked warehouse on orders before 3 PM CST. Backed by a 1-year OEM warranty and 30-day hassle-free returns on uninstalled parts.
This part is compatible with Carrier model PH2PNB036000AA. Always verify the part number against your unit's data plate before ordering.
OEM parts are manufactured to the exact factory specifications for your unit. Generic aftermarket alternatives may fit physically but often use lower-rated components that reduce equipment life and void manufacturer warranties. When the cost difference between OEM and generic is $10-30, the OEM part is always the smarter investment on a system worth $5,000-$15,000.
Same-day shipping on orders before 3 PM CST. Standard delivery 2-5 business days, express options available at checkout. 30-day hassle-free returns on uninstalled parts — free return shipping included. 1-year OEM factory warranty coverage.