OEM Carrier Condenser Fan Motor 1/4 HP 1100 RPM for Model PH2PJB048000AA

This OEM Carrier condenser fan motor (part HC39GR234) is the factory-specified replacement for the Carrier PH2PJB048000AA 4-ton split-system heat pump condenser. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat and maintain proper refrigerant pressures. When this motor fails, the outdoor unit will either stop running entirely, trip the high-pressure limit, or cycle off prematurely — leaving you with no cooling or heating and a potentially damaged compressor.

• Specs: 1/4 HP | 208-230V | Single Phase | 1100 RPM | 1.5 Amps | 60 Hz | CWLE Rotation | Frame 48 | 0.5" Shaft Diameter | 1.5" Shaft Length | Totally Enclosed
• OEM vs Generic: This is a Carrier Factory Authorized Part built to exact factory tolerances. Generic motors often deviate in RPM, rotation direction, or shaft dimensions — risking improper airflow, refrigerant overcharge conditions, and compressor failure. OEM ensures a true drop-in replacement with no guesswork.
• Install difficulty: 3/5 — Disconnect power and discharge the run capacitor before beginning. Tools needed: 1/4" and 5/16" nut drivers, Phillips screwdriver, multimeter, wire stripper. Photograph all wiring connections before removal. Always replace the run capacitor simultaneously to prevent early motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH2PJB048000AA (4-ton heat pump condenser). Verify voltage, HP, and rotation direction on your unit's data plate before ordering. Our parts specialists are available to confirm fitment — contact us before you order and we'll verify compatibility at no charge.