OEM Carrier Condenser Fan Motor 1/4 HP 208-230V for Model PH1ZNA048000AAAA

This OEM condenser fan motor (part #HC39GR234) is the factory-specified replacement for the Carrier PH1ZNA048000AAAA 4-ton heat pump condensing unit. The condenser fan motor drives the outdoor fan blade that pulls air across the condenser coil to reject heat from the refrigerant. When this motor fails, the outdoor unit will overheat, trip the high-pressure limit, and shut down — leaving you with no cooling or heating and a potential compressor at risk. Common failure symptoms include the outdoor fan not spinning, the unit shutting off shortly after startup, or the motor running hot and humming without turning.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5A | 60 Hz | Frame 48 | Shaft Diameter 0.5" | Shaft Length 1.5" | CWLE rotation | Vertical mount only
• OEM vs Generic: This is a genuine Carrier OEM motor built to exact factory tolerances for the PH1ZNA048000AAAA. Generic motors often deviate in shaft length, rotation direction, or RPM, leading to improper airflow, blade clearance issues, and premature failure. OEM means guaranteed fit and full rated performance from day one.
• Install difficulty: 3/5 — Shut off power at the disconnect and verify zero voltage before opening the unit. Tools needed: 1/4" and 5/16" nut drivers, wire stripper, multimeter, and a helper to support the fan assembly. Photograph all wiring before disconnecting. Always replace the run capacitor at the same time — a weak capacitor is the leading cause of new motor failure.
• Warranty: 1-year OEM factory warranty. In-stock units ship same business day from our warehouse.

Compatibility: Designed and factory-matched for Carrier model PH1ZNA048000AAAA 4-ton heat pump condensing units. Verify your unit's data plate shows part number HC39GR234 or GE/Genteq 5KCP39GGY910S before ordering. Not sure? Contact our team — we verify fitment before every order so you get the right part the first time.