OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH1ZNA042000AAAA

This is the factory-specified OEM condenser fan motor for the Carrier PH1ZNA042000AAAA packaged heat pump unit. The condenser fan motor drives the outdoor fan blade to expel heat from the refrigerant through the condenser coil. When this motor fails, the outdoor fan stops spinning — causing the unit to overheat, trip high-pressure safeties, or shut down entirely with no cooling or heating output. Common symptoms include the compressor running briefly before lockout, the outdoor fan humming without spinning, or a burning smell near the condenser cabinet.

• Specs: 1/4 HP | 208-230V | 1100 RPM | 1.5 Amps | 60 Hz | Single Phase | CWLE Rotation | Frame 48 | 0.5" Shaft Diameter | 1.5" Shaft Length | Totally Enclosed
• OEM vs Generic: This OEM motor is factory-matched to the HC39GR234 specification, ensuring exact torque curve, thermal overload protection, and bearing life. Generic motors often deviate in RPM tolerance and shaft geometry, risking fan blade imbalance and premature failure.
• Install difficulty: 3/5 — Requires disconnecting high-voltage wiring at the contactor and capacitor, removing the fan blade (3/16" hex key), and unbolting the motor bracket. Always discharge the run capacitor before touching motor terminals. Tools needed: multimeter, 3/16" hex key, nut driver set, needle-nose pliers. Photograph all wiring before disconnecting. Pro tip: Replace the run capacitor at the same time — a weak capacitor is the #1 cause of new motor failure.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Direct OEM replacement for Carrier model PH1ZNA042000AAAA packaged heat pump units. Verify voltage, HP, and RPM on your unit's data plate before ordering. The successor part HC39GE238 may be substituted — our fitment team can confirm before you order. Questions? Call or chat — we verify fitment on every motor order.