OEM Carrier Condenser Fan Motor 1/4 HP 208-230V 1100 RPM for Model PH1RPA060000AAWB

This is the factory OEM condenser fan motor (part number HC39GR234) for the Carrier PH1RPA060000AAWB packaged unit. The condenser fan motor drives the outdoor fan blade that expels heat from the condenser coil — a critical function for proper refrigerant condensing and overall system efficiency. When this motor fails, the condenser coil overheats, causing the high-pressure limit to trip, the compressor to short-cycle, or the system to deliver warm air entirely. Listen for a humming outdoor unit with a stationary fan blade, or a unit that shuts down minutes after startup — both are classic signs of condenser fan motor failure.

• Specs: 1/4 HP | 208-230V | 1-Phase | 1100 RPM | 1.5 Amps | 60 Hz | CWLE rotation | Frame 48 | 0.5" shaft diameter | 1.5" shaft length | GE/Genteq cross-reference: 5KCP39GGY910S
• OEM vs Generic: This is the genuine Carrier factory part — identical in every dimension, winding specification, and insulation class to what was installed at the factory. Generic motors often deviate in RPM and rotation direction, risking coil damage and voiding equipment warranties.
• Install difficulty: 3/5 — Disconnect power at the disconnect box and wait for capacitor bleed-down before handling. Tools needed: 1/4" and 5/16" nut drivers, needle-nose pliers, multimeter, and wire connectors. Always photograph existing wiring before disconnecting. Replace the run capacitor at the same time to protect the new motor from premature failure due to a degraded capacitor.
• Warranty: 1-year OEM factory warranty. In-stock and ships same business day from our warehouse.

Compatibility: Engineered for the Carrier PH1RPA060000AAWB packaged unit. Verify HP, voltage, RPM, rotation, and shaft specs on your unit's motor data plate before ordering. Our technical team is available to confirm fitment — contact us before you order if you have any questions.