OEM Carrier Condenser Fan Motor 1/4 HP 1100 RPM 208-230V for Model PH1RPA036000AAWB

This OEM condenser fan motor (part #HC39GR234) is the factory-specified replacement for the Carrier PH1RPA036000AAWB split-system condenser. The condenser fan motor drives the outdoor fan blade, pulling air across the condenser coil to reject heat from the refrigerant. When this motor fails, the outdoor unit overheats, triggers high-pressure lockout, or simply stops moving air — leaving you with a system that cools for a few minutes before shutting down or not starting at all.

• Specs: 1/4 HP | 208-230V, 1-Phase, 60Hz | 1100 RPM | 1.5 Amp | Frame 48Y (5-5/8" diameter) | 3-wire leads (black, yellow, brown) | CWLE rotation (counter-clockwise looking down at shaft) | 1.5" shaft extension | Vertical mount only
• OEM vs Generic: This OEM unit is wound to exact factory tolerances for the PH1RPA036000AAWB, ensuring correct amperage draw and RPM. Generic motors often deviate in rotation speed or amperage, risking compressor damage due to insufficient airflow across the coil.
• Install difficulty: 3/5 — Disconnect power and discharge the run capacitor before starting. Tools needed: multimeter, 5/16" and 3/8" nut drivers, wire stripper, and needle-nose pliers. Always photograph the wiring harness and fan blade pitch before disassembly. Pro tip: replace the run capacitor at the same time — a failing capacitor is frequently the root cause of premature motor failure.
• Warranty: 1-year OEM factory warranty. In stock and ships same business day from our warehouse.

Compatibility: Designed for Carrier model PH1RPA036000AAWB condensing units. Cross-references include HC39GR234A. Always verify HP, voltage, RPM, rotation, and shaft diameter against your unit's data plate before ordering. Our fitment team is available to confirm compatibility before you buy — order with confidence.